Verify Paypal using Smartmoney in just minutes!!!

Using Smart Money is one of the fastest way to verify your Paypal account. Using this method, you will be able to verify your Paypal account in a few minutes. Just read carefully and follow the instructions to avoid problems.

Common Problems:

There are common mistakes yet easy to resolve why others can't verify their Paypal using Smart Money. These are the following:

• Insufficient Funds - Paypal will deduct Php100 that will be refunded to your Paypal after the verification within 24hrs and 1$ charge for the verification. To make sure that you have sufficient funds, put Php200 fund in your Smartmoney account.

• E-mail Verification - You will be asked to verify your Paypal upon signing-up via E-mail. Please check your email for the activation link.

• Wrong Info - common sense is required for this. Even other money transfer outlets or bank will require to verify your identification. We are dealing real money here, so don't use names like Bugs Bunny or fake information.

• Unlock Smartmoney - This one is very important. This is a security feature to protect your Smartmoney account from unauthorized online usage. You have to UNLOCK your Smartmoney before making Internet/Online transactions. This can be done by navigating SmartMenu on your mobile phone. 

Verification Process:

STEP 1. Login to your Paypal account and click "Get Verified".

STEP 2-A. Fill-up ALL the information needed. Enter your Smartmoney account number, expiration date and CVC, these informations can be seen printed on your Smartmoney card. See the image below.

NOTE: After filling all the required information, DO NOT click "Continue" yet. You have to unlock your Smartmoney account first. Follow the steps below.

STEP 2-B. To unlock your Smartmoney account for online transactions, just follow the instructions below using your mobile.

Navigate you SmartMenu select Smartmoney --> go to Internet Txns --> Unlock 

  

Select your Smartmoney account --> Press Ok and enter your W-PIN.

You will receive a SMS that your Smartmoney is now unlocked. You may now go back to your Paypal account and click "Continue"

STEP 3. After clicking "Continue", you will now receive your 4-digit code to verify your Paypal. Your 4-digit code will be sent via SMS. Go back to "Account Overview" and click "Get Verified" (See image below)

Sample SMS with the 4-digit verification code

STEP 4. Enter the 4-digit code and click "Confirm Card" to finish the verification of your Paypal account.

Congratulations! Your Paypal is now Verified!!!

Get Free Avast! Antivirus Internet Security License

How to get Avast! Internet Security for FREE

2015-Dec 04: Still working!!!
NOTE: The process are still the same but the screenshots maybe different due to website changes and software updates.

Having Free version of Avast Antivirus keeps our computers safe from viruses, malwares, trojans and other possible infections that we can get by surfing around the internet. But, how about securing our transactions or doing online shopping and banking?

We can get more security by upgrading to Avast Internet Security. It gives us more security doing our banking transactions, online shoppings, protects us from hackers, stops annoying spams and secure our personal data.

You don’t have money to buy Avast! Internet Security? Don’t worry! Avast is giving away Avast Internet Security License for FREE. Yes its FREE. All you have to do is download the free version of Avast! Antivirus and share it to your friends on Facebook, Twitter, Google+ or share it thru E-mail.

Follow the instructions below on How to get Avast! Internet Security License for FREE.

1. First, get Avast Free Antivirus here. http://www.avast.com/get/7AjwksR0

2. After downloading, Install Avast Free Antivirus and just follow the installation procedure.

3. Register your Avast! to make an account.

4. If you register your Avast Antivirus via Email, you must login to your e-mail and click the verification link sent by avast to activate your avast account.

5. Login to my.avast.com and go to recommendations tab.

6. Share Avast! thru Facebook, Twitter, Google+ or copy your recommendation link and share it to your friends. When your friends downloaded and install avast from your link, you will get credits and the download button for your FREE Avast Internet Security License will be enabled.

How to make Windows XP bootable USB Flashdrive

Bootable USB Windows XP Installer

Does your computer doesn't have CD/DVD Drives? Or your CD/DVD drives are defective? Or you have mini laptop and you want to re-format or do a fresh install of your operating system? Well, you are in the right place. Here, you will learn how to make a bootable USB flashdrive installer for Windows XP.

Making a bootable USB Flashdrive Windows XP installer will allow us to install our beloved Windows XP without using an optical disk drive (CD/DVD-ROM drive). It is handy and very useful for those who want to format or do a clean installation on their computers. It works like we were installing using an optical drive.

This method has been tested and working with many devices like Asus Eee PC, HP mini Laptops, Desktops, and other similar computers. This is also a known alternative method if you don’t have an external optical disk drive.

Read carefully and prepare the following:

• Must have your own copy of Windows XP and save it inside a folder anywhere in your computer. 
• USB_Prep8 – This is the tool that we are going to use creating the bootable usb flashdrive installer. You can find it easy over the internet or you can just download here.
• USB Flashdrive (less than 2GB is recommended) – more than 2GB is also working but sometimes we encounter more errors using more than 2GB.

Creating USB Windows XP Installer

1. Extract usb_prep8.zip anywhere in your computer.
2. Open usb_prep8.cmd 
3. Press any key to continue…

4. Select your USB Flashdrive
• Select source path of your XP Installer

• Click Start

 

5. A window will appear, just click yes.

6. Close PeToUSB Window

7. Type number “1” (without quotations) and press enter, then select the location of your Windows XP Setup.

8. Type number “3” (without quotations) and press enter, then type the drive letter of your USB Flashdrive.

9. Now, type number "4". If a window appear and ask to delete temp image file, just click yes.

10. Proceed with format? Press Y and Enter.

11. When format is complete, just press any key to continue.

12. Copying of files will start.

13. Making of LocalSource folder $WIN_NT$.~LS Ready• Press any key to continue.

14. A window will pop out asking you to copy file to your USB drive.

15. The files will start to copy to USB drive. It may take several minutes, just wait until it finish the process.

16. Another window will pop out. Would you like USB-Stick to be preferred Boot Drive U? Just click yes.

17. Would you like to unmount the Virtual Drive ? Just click Yes and press any key to continue.

Your USB Flash Drive is now ready.

To install Windows XP using your bootable USB Flashdrive, you must enter BIOS setup and go to boot options then set your USB Flashdrive to boot first in boot order. Save changes that you've made and exit BIOS.

When you boot on your USB Flashdrive, a black screen with text will be displayed. It is a selection menu that will bring you to the process of Windows XP installation. Just select the text mode setup.

The Windows XP setup will now begin. Just follow the steps just like you were using a real CD of Windows XP.

How to put Facebook Comment Box on blog ?

If you are always logged on Facebook and you are managing a blog, it is good to put a Facebook comment box plugin there. It can also publish the comment with a link to your blog if someone posted a comment to your blog. With that, you can have more visitors to your blog site.

You can also check if someone leaves a comment on your blog without checking all the pages or posts on your blog. You can also manage the comments and make a reply just using your Facebook account

Comment Box Screenshot

 Let’s start the process.

PART 1 : Creating your apps

1. Go to https://developers.facebook.com/apps and create a new app. See image below.

2. Type any valid application name and click “Continue”.

3. Enter the captcha code and click “Continue”.

4. Get your Comment Box App ID. This is important. Copy and save it somewhere in your computer. You will need this later.

 

5. On App Domains, enter your domain name. I am using blogspot that’s why I entered blogspot.com.
Disable Sandbox Mode, enter you blogsite url and hit “Save” button.

Now, let's proceed to the second part and put the codes into your blogger account.

PART 2 : Applying the codes

1. Login to your blogger account.

2. Go to Template and click Edit HTML.

3. Put this code inside the <html> tag.

Result should look like this:

<html xmlns:fb='http://www.facebook.com/2008/fbml'>


4. Insert this after the <body> tag.



5. Insert this code before the </head> tag.


6. Find this line <b:includable id='comment-form' var='post'>
After that code, insert the following codes below


7. After putting the codes in your template, hit “Save Template” button.


Go to your blog and check your blog post. You will see a comment box below your post.

Tutorial : How to run Turbo C in DosBox ?

Many are asking where to get Turbo C that is compatible for their Windows 7 computers. Turbo C is still running on Windows 7 but it doesn’t allow me to enter full screen just like the old days of windows. But using some applications like DOSBox, will allow us to use Turbo C in fullscreen mode.

Follow this guide on how to run Turbo C with DOSBox.

In this guide, I have already installed Turbo C on my computer.
Now, let’s proceed to the guide.

You must have DosBox installer first. You can download it from the link below.
Dosbox DL link : http://www.dosbox.com/download.php?main=1

Dosbox Installation:

1. Run DosBox installer.

2. Just click Next until the installation folder selection then click Install.

 

 

 

3. After the installation process is completed, close the installation window.

You are done installing DOSBox.

We are now going to make DOSBox to run Turbo C everytime you run DOSBox.

I have read the manual of DOSBox and found out the following procedure that will let us run Turbo C much easier, instead of typing commands just to run Turbo C or any program.


4. After installing DOSBox, right click on DosBox shortcut icon on your desktop and click Properties.

5. In Shortcut tab, we will edit the target textbox and put the following command:

"C:\Program Files\DOSBox-0.74\DOSBox.exe" C:\TC\BIN\TC.exe -c "mount T C:\TC\BIN "

6. Click Apply and OK to close the window.

You can now run Turbo C and use it like old times.

NOTE: The instructions above (Step 5) will work only if the installation path of DOSBox and Turbo C are correct, or you will have to edit the path where you installed DOSBox and Turbo C.